I haven't been following this thread. Wow! Nice rack! I mean the pic on Clint's computer.
Seriously, do you have a set of plans for that? I would really like to build one. Very nice.
Thanks, Bob. I threw away my sketches when I finished the rack...Below's what I had scanned and fished out of my recycling bin, (sorry some of the pics came so big).
The whole thing is oak (but if I went back, I'd go with walnut instead,as the oak is very hard.)
-The 4 shelves: 20"x3"x 6/16". Nine 1"-holes every 2 inches. (The center of the first hole is at 2", the center of the second hole at 4", etc...)
Notice notches 1/2" from either end to accomadate vertical wall-mount
-The eight brackets are made of the same wood, 6/16" thick. I fashioned these after the ones on the Simenon (double humped)
-The two vertical mounts are 1/2 square dowels. They're about 28" long. The shelves are 8" apart and the mounts continue a couple of inches passed the last bracket.
Let me know if you have any other questions...good luck!
Original Rack Detail
Original Rack- notice shape of brackets
The only sketch left. But useful.